Good Guys list...

[White, Chris]

Add PatternProz...to that list.  Russell Honea of Ultimate RC Hobbies in Broken Arrow, OK. is not only a good Masters flyer, and good builder, but also a real promoter and assistant to pattern flyers over the US.

www.patternproz.com

Chris White



-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of Wayne Galligan
Sent: Wednesday, February 02, 2005 11:06 AM
To: discussion at nsrca.org
Subject: Re: Good Guys list...


Not in any order

1. Radio South... no question first class service from the top down.  Got my
Transmitter fixed fast(sent and returned in less then a week) or sent me
parts(same day) to be able to compete in contests that where just days away
on two occassions.
2. Central Hobbies...   ditto....
3. FMA....  replaced or repaired servo's that where out of warranty.
4. Horizon Hobbies...  same with JR servo's
5. Great Plains....  replaced my MonoKote iron when handle broke
6. PAC products....  the Dunphy's are unquestionably top notch suppliers.
7. Mikes Hobby shop in Carrolton TX
8. Wild Bills Hobby shop in Irving TX
9. AeroSlave...  although I am closely affiliated with these guys I have to
say their products are quality and getting better all the time.  So I may
sound biased but...
Their kits have won many competitions in the last three years.
Their kits have won 4 separate district championships.

muff said...

Wayne Gilligan






 ----- Original Message ----- 
From: "Bill Southwell" <bnbsouthwell at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Wednesday, February 02, 2005 11:35 AM
Subject: Good Guys list...


> Hi All,
>
>    I want to start a positive thread on our experinces with our Pattern
> or R/C suppliers. I have had a few that need mentioning. Pleas lets all
> add to this list.
>
> 1. Radio South... seriveced my 8103 very fast and tuned it up to boot.
> Very prompt and did more than I expected
> .
> 2. Aeroslave .... saw that I sold my Aries on the list. They contacted
> my to check on my satisfaction and to make sure the sale was not quality
> related. It was not quality related as per the kit it was the extreme
> low quality of my bank account that forced the sale. I purched the kit
> second hand but they put me in the loop with updates and communicated
> with me like I had purched it from them direct.
>
> 3. PAC...They supported my purchase's with untold amount of  "answering
> a newbie pattern guys " questions. I never got a "quit pestering us"
> resonse and I am still flying R/C and Pattern due to Mike and Maureens
> patience with me.
>
> Great People all !
>
> OK I have started this thread. Lets make it a big one. If you have had a
> positive experince with any service provider please post it. If its a
> repeat company Thats even better.
>
> Best Regards
> Bill Southwell
> Iuka, MS
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.