Good Guys list...

[Tom Hinton]

Russ is definitely one of the nice guys, in the same class with Tony @ Radio
South and the crew at Central. Pattern is lucky to have a lot of nice people
to deal with. The list of "bad" guys would be short. They are the exception
instead of the norm. just my humble opinion.
Tom
----- Original Message -----
From: "Tom Simes" <nsrca at shinymetalass.com>
To: <discussion at nsrca.org>
Sent: Wednesday, February 02, 2005 1:26 PM
Subject: Re: Good Guys list...


> On Wed, 2 Feb 2005 11:29:19 -0600
> "White, Chris" <chris at ssd.fsi.com> wrote:
>
> > Add PatternProz...to that list.  Russell Honea of Ultimate RC Hobbies
> > in Broken Arrow, OK. is not only a good Masters flyer, and good
> > builder, but also a real promoter and assistant to pattern flyers over
> > the US.
> >
> > www.patternproz.com
>
> I'll definitely second PatternProz!  Russell was very helpful in pushing
> me up the learning curve that exists between .40 size sport planes and
> intermediate (.90 2C size) pattern planes.
>
> I would like to add the VectorFlight folks as well.  They were very
> helpful and timely in answering several general questions about their
> kits.  I wanted to buy one of their 58" Extra ARFs, but really wanted to
> put my own covering scheme on it.  Figuring I had nothing to loose, I
> asked if they could sell one as an ARC and much to my surprise they said
> "We can certainly ship the airplane without the covering if you wish!".
> Another bonus for me is that they will ship priority mail to Alaska
> which is MUCH cheaper than many retailers who insist that anything going
> to Alaska needs to be sent via 2nd day air.
>
> http://www.vectorflight.com/
>
>
> I have also enjoyed super service from Radio South (like everyone!)
>
> Boca bearings (their database makes a potential nightmare of matching
> bearings into no big deal).
>
>
> --
> Tom
>
> _____________________________________________________________________
>
>        |  ,  |               Tom Simes
> ---------(@)---------        AMA 230068
>         --|--                NSRCA 3830
>           '                  nsrca at shinymetalass.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.