Programming Futaba 9C

[Brian Young]

Jon, it can be done below one click instead of above. You should see a little arrow that points up or down next to the POSI field in the mix menu. Move down to this field and roll the dial, the arrow will change directions and the mix will now be active below 3% on the stick instead of above. 
 
Im not sure how you can disable the mix for a landing setup. I have this mix setup but dont really worry about it for landing since Im holding up elevator to land anyway.

JonLowe at aol.com wrote:
I want to have about 2-3% down elevator at full idle to straighten downlines, and have it all gone at one click above full idle.  I want to be able to switch it off for landings.  I thought I could do it by tieing it to the throttle stick as the switch, but there is no way to switch it off.  I tried a programmable mix, but all I seem to be able to get is down elevator ABOVE full idle, not one click and below.  Hopefully someone else out there has done this and can steer me in the right direction.
 
Thanks.
 
Jon Lowe

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040903/60a7e71c/attachment.html