OS160 Engine mount

[vicenterc at comcast.net]

I did the same and it worked for me.  You will need to file the surface after cutting.

Vince

-------------- Original message -------------- 

Randy,
Either use a bandsaw with metal blade and cut off about 1/16th" off each side or cut the backplate in half and move it about 1/8th" apart. I've done both and am still using them.
Bob Ruppel
Nashville,TN
THERUPMAN at aol.com
6153734703
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041025/d97b5c4c/attachment.html