lightweight filler
Verne Koester
verne at twmi.rr.com
Thu Oct 21 17:23:18 AKDT 2004
Bob,
Call me.
Verne
----- Original Message -----
From: "Bob Kane" <getterflash at yahoo.com>
To: <discussion at nsrca.org>
Sent: Thursday, October 21, 2004 8:52 PM
Subject: Re: lightweight filler
> Lee Davis says one way to make the stab removable on
> the deluxe kit (wings and stab already sheeted) is to
> cut a slot through the sheeting and into the foam deep
> enough to bury the socket. Put the tube socket in in
> one piece with a couple of hard tube supports tied to
> the sheeting, glue and fill the slot, then cut the
> stab apart. The filler has to be light, compatable
> with foam, and sand easily. In the contruction photos
> on the website, the same filler is also used to build
> a small fillet on the center portion of the stab where
> it exits the fuse.
>
> --- Verne Koester <verne at twmi.rr.com> wrote:
>
> > Bob,
> > What kind of characteristics are you looking for in
> > the filler and exactly
> > how do plan to use it?
> >
> > Verne
> >
> >
> > ----- Original Message -----
> > From: "Bob Kane" <getterflash at yahoo.com>
> > To: <discussion at nsrca.org>
> > Sent: Thursday, October 21, 2004 7:33 PM
> > Subject: lightweight filler
> >
> >
> > > I'm sorry I did not save the emails, but does
> > anyone
> > > have suggestions for a lightweight, sandable
> > filler? I
> > > plan on converting my Temptation deluxe kit to a
> > > removable stab. This webpage
> > >
> >
> http://www.omahawks.org/workshops/completed/ronwilliamstemptation/
> > > has some pics showing the conversion. There is a
> > light
> > > aqua colered filler in the pics, I wonder if
> > anyone
> > > knows what it is, thanks.
> > >
> > > =====
> > > Bob Kane
> > > getterflash at yahoo.com
> > >
> > >
> > >
> > > _______________________________
> > > Do you Yahoo!?
> > > Declare Yourself - Register online to vote today!
> > > http://vote.yahoo.com
> > > =====================================
> > > # To be removed from this list, go to
> > http://www.nsrca.org/discussionA.htm
> > > and follow the instructions.
> > >
> > >
> >
> > =====================================
> > # To be removed from this list, go to
> > http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
>
> =====
> Bob Kane
> getterflash at yahoo.com
>
>
>
> __________________________________
> Do you Yahoo!?
> Take Yahoo! Mail with you! Get it on your mobile phone.
> http://mobile.yahoo.com/maildemo
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
More information about the NSRCA-discussion
mailing list