doublers

Jim Ivey jivey61 at bellsouth.net
Fri Nov 26 05:38:52 AKST 2004


> Tom
If you have a fiberglass or molded fuse,leave out the rudder post 'till the last step, then you can reach the doublers area.Also make sure the glue area is clean of release agent from the F/G process. Epoxy usually is best to use here.

Jim Ivey
> From: "Tom Hinton" <tph1 at bellsouth.net>
> Date: 2004/11/26 Fri AM 09:10:13 EST
> To: <discussion at nsrca.org>
> Subject: doublers
> 
> What is the best way to add balsa doublers to the inside of the fuse for hor. stab?
> thanks
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list