Focus Cowl Needed

[Rusty Dose]

I have 2 extra cowls due to updating to the new cowl.  Please contact me off-line.

Rusty Dose
  ----- Original Message ----- 
  From: Larry N Lisa 
  To: discussion at nsrca.org 
  Sent: Wednesday, May 12, 2004 3:04 PM
  Subject: Re: Focus Cowl Needed


  I'll have to try it, but there is allot of material that the original owner cut out of it. Gets very wobbly with the 140L.

  I flew the plane all season with the cowl beat up...Will probably hold out, but wanted to clean it up with a new paint job...

  I might try filling in the fine cracks with thin CA. I also have some areas that I might use some body filler to fill in some holes...

  Nice job on your plane...

  Larry
    ----- Original Message ----- 
    From: Scott Pavlock 
    To: discussion at nsrca.org 
    Sent: Wednesday, May 12, 2004 2:39 PM
    Subject: Re: Focus Cowl Needed


      Larry:

          What we did with our new cowl is sand the inside of it just a little and brush the glass shavings into the crack, then we filled it with thin CA. Works great!
      _______________________________________________________________
      Scott Pavlock
      586-295-2611

      groups.msn.com/scottspatternpage

      photos.yahoo.com/f3aflyer7
        ----- Original Message ----- 
        From: Larry N Lisa 
        To: discussion at nsrca.org 
        Sent: Wednesday, May 12, 2004 2:06 PM
        Subject: Re: Focus Cowl Needed


        Older Version...
          ----- Original Message ----- 
          From: Rock, Charles 
          To: discussion at nsrca.org 
          Sent: Wednesday, May 12, 2004 12:38 PM
          Subject: RE: Focus Cowl Needed


          Which Focus II or the older one
            -----Original Message-----
            From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Larry N Lisa
            Sent: Wednesday, May 12, 2004 12:02 PM
            To: NSRCA
            Subject: Focus Cowl Needed


            Anyone have a new Focus Cowl they want to part with?

            Or, any recommendations on how to repair the spider web cracks to prevent a new paint job from cracking all over.

            Larry Diamond
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040512/fe8c5327/attachment.html