Futaba 9ZAP Problem
Michael Ramsey
michaelr at flying-models.com
Wed May 5 09:22:25 AKDT 2004
Make sure your throttle trim is all the way down. If it's all the way up,
the ESC thinks the throttle is on, and as a safety won't start the motor.
Michael Ramsey
----- Original Message -----
From: "Ron Van Putte" <vanputte at cox.net>
To: <discussion at nsrca.org>
Sent: Wednesday, May 05, 2004 1:15 PM
Subject: Futaba 9ZAP Problem
> All - I have tried everything I can think of and still can't solve a
> problem. I have a Futaba 9ZAP transmitter and was using it in the PPM
> mode to fly a GWS Slow Stick, using a GWS R4P receiver. Everything was
> fine until one day I went to fly the Slow Stick. The aileron, elevator
> and rudder servos worked fine, but the motor would not work. I tried
> everything I could think of, including trying an unused model in the
> 9ZAP. Nothing worked. Then I tried a different Futaba 9ZAP
> transmitter and everything worked fine. Huhhhhh? Any ideas?
>
> Ron Van Putte
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.
More information about the NSRCA-discussion
mailing list