TT Pro 1.20 Question

[Tom Hinton]

I just got the one Mike had and was wondering about a pipe for it. What is
the TTR 9712 pipe?
thanks
----- Original Message -----
From: "Paul Lawrence" <pwl45 at yahoo.com>
To: <discussion at nsrca.org>
Sent: Tuesday, June 29, 2004 6:46 PM
Subject: TT Pro 1.20 Question


> I'm experimenting with a Thunder Tiger Pro 1.20 and wondered if anyone
knew
> how the tank should be vented. The manual says to run the fuel pickup line
> to the inlet on the pump and connect the pump outlet to the carb. Then it
> says, "Never to connect the tube from muffler/pipes pressure nipple to
fuel
> tank with this pump system." I'm thinking I just need to run an open vent
> line. Does that sound right?
>
> Also, any advice on what prop to run?
> This engine will be in a Tai Ji .60, runnning Pro Pattern 20%, weighting 9
> lbs and running the TTR 9712 pipe.
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.