More Webra problems

[Gordon Anderson]

Jim,

I'm getting lots to feedback about trying a different pump setup.... I think I
will try this and see what happens.

--Gordon 

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of jivey61 at bellsouth.net
Sent: Saturday, July 31, 2004 2:33 PM
To: discussion at nsrca.org
Subject: Re: More Webra problems

 Gordon
 I bought a regular backplate for my Webra 145,tapped for a pressure fitting,
and installed a cline regulater and a check valve which comes with the cline
regulater. You now will have the tank pressurized similar to a YS system.This
setup broadens the needle adjustments and makes the webra run well.
Just make sure you mount the regulater as close to the carburater as
possible,like 3 inches. I used this setup last summer.I also had problems with
the finnicky pump and this is the only way I could make this excellant engine to
run reliable.
 You spend 70+ more and have a good setup.

 Jim Ivey

> 
> From: "Gordon Anderson" <GAA at owt.com>
> Date: 2004/07/31 Sat PM 05:58:32 EDT
> To: <discussion at nsrca.org>
> Subject: More Webra problems
> 
> I thought I dad the Webra problems solved but this turns out not to be the
case.
> Today I had 2 more dead stick landings. In over a dozen flights I have 
> had only
> 3 power on landings. I'm done with this thing.
> I'm interested in recommendations for a replacement 2 stroke. I can't 
> seem to find a OS 1.40RX. I have had good luck with the OS 1.60 but I 
> don't want to hack up the fuse for the wrap around header. Anyone have
feedback on the Mintor?
> If you are thinking about a webra, DON'T
> 
> --Gordon
> 
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.