Kevlar question

[Wayne Galligan]

I have used the eyelet's on the clevis and just tie a double knot and hit it
with a drop of thin c/a.   I buy a roll of kevlar control line  for about 8
bucks and last for several airplanes.

WG

----- Original Message ----- 
From: "Brian Young" <b4598070 at yahoo.com>
To: <sjcrozier at comcast.net>
Cc: <discussion at nsrca.org>
Sent: Monday, January 26, 2004 8:26 AM
Subject: Re: Kevlar question


> John, what I did was take the small Sullivan brass
> threaded ends, they are hollow clear through, and
> threaded the kevlar through that then crimped them and
> drop thin CA on the end opposite where the kevlar
> exits to fill with CA.
>
> Have done same with fishing leader.
>
> Got this tip from here:
> http://www.rcaerobats.net/Pullpage.htm
>
> This is the first Ive used kevlar for this use, had it
> around so I thought I would try it.
>
>
> --- John Crozier <sjcrozier at comcast.net> wrote:
> > I plan to use Kevlar for my pull-pull rudder.
> > Is the procedure to double the line back through the
> > collar, crimp it,  and
> > hit it with a drop of thin CA?
> > Also, I'm concerned about the loop wearing where it
> > goes through the servo
> > arm hole.
> > Feedback appreciated.
> > Thanx..croz
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the
> > body.
> > #
> >
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free web site building tool. Try it!
> http://webhosting.yahoo.com/ps/sb/
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#