Nose rings, WAS Re: TEST- now motor mount Poll

[Keith Black]

Bob, I agree with Jon, I'm having a hard time understanding how you
sandwiched it, can you provide some pictures?  Also, what method did you use
to make it removable? Did you do something similar to the Gator
installation?

Thanks,
Keith Black


----- Original Message ----- 
From: <JonLowe at aol.com>
To: <discussion at nsrca.org>
Sent: Tuesday, January 06, 2004 8:58 AM
Subject: Nose rings, WAS Re: TEST- now motor mount Poll


> Bob,
> I looked at the McMaster Carr website at the o ring you described.  If I'm
looking at the right one, it has an "X" crossection.  How did you sandwich
it between two ply plates?  I'm having a hard time visualizing it.
>
> Jon Lowe
>
> <<In a message dated 01/03/2004 10:21:51 AM Central Standard Time,
rcaerobob at cox.net writes:
>
>
> One of the most productive experiments over a period of several years was
discovering that the nose ring is probably much more important than we
think.  I've used a variety of grommets, bushings, and settled on a
dual-concave 3/16" thick O ring from McMaster Carr.  Sandwiched between
1/16" ply plates, and removable, it allows easy replacement.>>
>
>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#