Nose rings, WAS Re: TEST- now motor mount Poll

[JonLowe at aol.com]

Bob,
I looked at the McMaster Carr website at the o ring you described.  If I'm looking at the right one, it has an "X" crossection.  How did you sandwich it between two ply plates?  I'm having a hard time visualizing it.

Jon Lowe

<<In a message dated 01/03/2004 10:21:51 AM Central Standard Time, rcaerobob at cox.net writes:


One of the most productive experiments over a period of several years was discovering that the nose ring is probably much more important than we think.  I've used a variety of grommets, bushings, and settled on a dual-concave 3/16" thick O ring from McMaster Carr.  Sandwiched between 1/16" ply plates, and removable, it allows easy replacement.>>




=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#