D'Best building jigs

[Evan H. Dygert]

Thanks. I think that I will either go with Bruce 
Thompson's or Buddy's jig. I am waiting for Buddy to reply 
to see what that jig looks like.

On Wed, 29 Dec 2004 12:49:43 -0600
  "Ray Rhodes" <rcrhodes at swbell.net> wrote:
>Hi Evan
>Buddy`s jig is the best I have seen, but if you would 
>like a copy of  Eric`s
>jig instructions from May `98, e-mail me off list and I 
>will scan it to you.
>Ray Rhodes
>rcrhodes at swbell.net
>
>----- Original Message ----- 
>From: "Evan H. Dygert" <evand at dygertconsulting.com>
>To: <discussion at nsrca.org>
>Sent: Wednesday, December 29, 2004 8:52 AM
>Subject: D'Best building jigs
>
>
>> Is there anyone out there with a very old copy of the 
>>May
>> '98 K-Factor? It has the instructions for making some
>> building jigs. Alternatively, could you point me to
>> sources of information about either buying or building
>> jigs? I am just getting started building and want to 
>>make
>> sure that everything is straight. The only kits I have
>> built so far have been a couple of Guillows kits. I am
>> looking at getting the plans and foam cores for the 
>>Boxer
>> 90 or 120.
>>
>> Evan H. Dygert
>> Dygert Consulting, Inc.
>> 364 Twelve Oaks Dr.
>> Winter Springs, FL 32708
>> Tel: 407-739-8194
>> Email: evand at dygertconsulting.com
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to 
>>http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
>
>=================================================
>To access the email archives for this list, go to
>http://lists.f3a.us/pipermail/nsrca-discussion/
>To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>

Evan H. Dygert
Dygert Consulting, Inc.
364 Twelve Oaks Dr.
Winter Springs, FL 32708
Tel: 407-739-8194
Email: evand at dygertconsulting.com
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.