D'Best building jigs

[Ray Rhodes]

Hi Evan
Buddy`s jig is the best I have seen, but if you would like a copy of  Eric`s
jig instructions from May `98, e-mail me off list and I will scan it to you.
Ray Rhodes
rcrhodes at swbell.net

----- Original Message ----- 
From: "Evan H. Dygert" <evand at dygertconsulting.com>
To: <discussion at nsrca.org>
Sent: Wednesday, December 29, 2004 8:52 AM
Subject: D'Best building jigs


> Is there anyone out there with a very old copy of the May
> '98 K-Factor? It has the instructions for making some
> building jigs. Alternatively, could you point me to
> sources of information about either buying or building
> jigs? I am just getting started building and want to make
> sure that everything is straight. The only kits I have
> built so far have been a couple of Guillows kits. I am
> looking at getting the plans and foam cores for the Boxer
> 90 or 120.
>
> Evan H. Dygert
> Dygert Consulting, Inc.
> 364 Twelve Oaks Dr.
> Winter Springs, FL 32708
> Tel: 407-739-8194
> Email: evand at dygertconsulting.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.