D'Best building jigs

[Evan H. Dygert]

I talked with Maureen at 
http://www.precisionaerocomposite.com/ just before they 
moved and she said the foam cores would be available soon. 
I haven't followed up on this yet.

On Wed, 29 Dec 2004 10:00:21 -0500
  "Randy" <randy10926 at comcast.net> wrote:
>I was going to build a boxer 60 this winter.  The new set 
>of plans and building manual are great.  I had problems 
>finding the foam cores though. I was lookng for a 
>winter/backup plane that I could sale after a year at the 
>club auction.  My idea was to that would make more 
>pattern planes available for club members to try without 
>a large cost to me.
>
>Then I looked at the excelleron90 and decided that 
>assembling an ARF was not such a bad idea.
>
>Randy
>----- Original Message ----- From: "Evan H. Dygert" 
><evand at dygertconsulting.com>
>To: <discussion at nsrca.org>
>Sent: Wednesday, December 29, 2004 9:52 AM
>Subject: D'Best building jigs
>
>
>> Is there anyone out there with a very old copy of the 
>>May '98 K-Factor? It 
>> has the instructions for making some building jigs. 
>>Alternatively, could 
>> you point me to sources of information about either 
>>buying or building 
>> jigs? I am just getting started building and want to 
>>make sure that 
>> everything is straight. The only kits I have built so 
>>far have been a 
>> couple of Guillows kits. I am looking at getting the 
>>plans and foam cores 
>> for the Boxer 90 or 120.
>>
>> Evan H. Dygert
>> Dygert Consulting, Inc.
>> 364 Twelve Oaks Dr.
>> Winter Springs, FL 32708
>> Tel: 407-739-8194
>> Email: evand at dygertconsulting.com
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to 
>>http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> 
>
>
>=================================================
>To access the email archives for this list, go to
>http://lists.f3a.us/pipermail/nsrca-discussion/
>To be removed from this list, go to 
>http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>

Evan H. Dygert
Dygert Consulting, Inc.
364 Twelve Oaks Dr.
Winter Springs, FL 32708
Tel: 407-739-8194
Email: evand at dygertconsulting.com
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.