D'Best building jigs

[Randy]

Still awaiting news that precisionaerocompositie is set up for making the 
Boxer 60 cores also.  Looks like I may get my two main winter projects 
finshed before the winter does.

Randy
----- Original Message ----- 
From: "Evan H. Dygert" <evand at dygertconsulting.com>
To: <discussion at nsrca.org>
Sent: Wednesday, December 29, 2004 2:37 PM
Subject: Re: D'Best building jigs


>I talked with Maureen at http://www.precisionaerocomposite.com/ just before 
>they moved and she said the foam cores would be available soon. I haven't 
>followed up on this yet.
>
> On Wed, 29 Dec 2004 10:00:21 -0500
>  "Randy" <randy10926 at comcast.net> wrote:
>>I was going to build a boxer 60 this winter.  The new set of plans and 
>>building manual are great.  I had problems finding the foam cores though. 
>>I was lookng for a winter/backup plane that I could sale after a year at 
>>the club auction.  My idea was to that would make more pattern planes 
>>available for club members to try without a large cost to me.
>>
>>Then I looked at the excelleron90 and decided that assembling an ARF was 
>>not such a bad idea.
>>
>>Randy
>>----- Original Message ----- From: "Evan H. Dygert" 
>><evand at dygertconsulting.com>
>>To: <discussion at nsrca.org>
>>Sent: Wednesday, December 29, 2004 9:52 AM
>>Subject: D'Best building jigs
>>
>>
>>> Is there anyone out there with a very old copy of the May '98 K-Factor? 
>>> It has the instructions for making some building jigs. Alternatively, 
>>> could you point me to sources of information about either buying or 
>>> building jigs? I am just getting started building and want to make sure 
>>> that everything is straight. The only kits I have built so far have been 
>>> a couple of Guillows kits. I am looking at getting the plans and foam 
>>> cores for the Boxer 90 or 120.
>>>
>>> Evan H. Dygert
>>> Dygert Consulting, Inc.
>>> 364 Twelve Oaks Dr.
>>> Winter Springs, FL 32708
>>> Tel: 407-739-8194
>>> Email: evand at dygertconsulting.com
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>>
>>
>>
>>=================================================
>>To access the email archives for this list, go to
>>http://lists.f3a.us/pipermail/nsrca-discussion/
>>To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>and follow the instructions.
>>
>
> Evan H. Dygert
> Dygert Consulting, Inc.
> 364 Twelve Oaks Dr.
> Winter Springs, FL 32708
> Tel: 407-739-8194
> Email: evand at dygertconsulting.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.