D'Best building jigs

[Randy]

I was going to build a boxer 60 this winter.  The new set of plans and 
building manual are great.  I had problems finding the foam cores though. I 
was lookng for a winter/backup plane that I could sale after a year at the 
club auction.  My idea was to that would make more pattern planes available 
for club members to try without a large cost to me.

Then I looked at the excelleron90 and decided that assembling an ARF was not 
such a bad idea.

Randy
----- Original Message ----- 
From: "Evan H. Dygert" <evand at dygertconsulting.com>
To: <discussion at nsrca.org>
Sent: Wednesday, December 29, 2004 9:52 AM
Subject: D'Best building jigs


> Is there anyone out there with a very old copy of the May '98 K-Factor? It 
> has the instructions for making some building jigs. Alternatively, could 
> you point me to sources of information about either buying or building 
> jigs? I am just getting started building and want to make sure that 
> everything is straight. The only kits I have built so far have been a 
> couple of Guillows kits. I am looking at getting the plans and foam cores 
> for the Boxer 90 or 120.
>
> Evan H. Dygert
> Dygert Consulting, Inc.
> 364 Twelve Oaks Dr.
> Winter Springs, FL 32708
> Tel: 407-739-8194
> Email: evand at dygertconsulting.com
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.