140L

[Tom Hinton]

Thanks for all the input guys. I know now that I was planning overkill.
Tom
----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: <discussion at nsrca.org>
Sent: Thursday, December 02, 2004 5:47 PM
Subject: Re: 140L


> 
> On Dec 2, 2004, at 3:41 PM, Jim Ivey wrote:
> 
> > Since you brought it up now you will have to cross your fingers.
> 
> Nah!  Merle Hyde knows what he is doing and that's what he recommends 
> using with the Hyde mount.  I've actually had the same setup in two 
> airplanes over a four-year span.  4-40s are all that's needed on a Hyde 
> mount.
> 
> Ron Van Putte
> 
> >> From: Ron Van Putte <vanputte at cox.net>
> >> Date: 2004/12/02 Thu PM 04:13:39 EST
> >> To: discussion at nsrca.org
> >> Subject: Re: 140L
> >>
> >>
> >> On Dec 2, 2004, at 2:19 PM, Tom Hinton wrote:
> >>
> >>> What size cap screws are usually used to mount a 140L to the mount,
> >>> 10/32 or 8/32?
> >>
> >> I am have my YS 1.40L on a Hyde mount,  with the recommended 4-40
> >> screws.  It's been in my Advantage for 2 1/2 years now, so I guess 
> >> it's
> >> not going to fall out any time soon.
> >>
> >> Ron Van Putte
> >>
> >>
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to 
> > http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.