140L

[Ron Van Putte]

On Dec 2, 2004, at 3:41 PM, Jim Ivey wrote:

> Since you brought it up now you will have to cross your fingers.

Nah!  Merle Hyde knows what he is doing and that's what he recommends 
using with the Hyde mount.  I've actually had the same setup in two 
airplanes over a four-year span.  4-40s are all that's needed on a Hyde 
mount.

Ron Van Putte

>> From: Ron Van Putte <vanputte at cox.net>
>> Date: 2004/12/02 Thu PM 04:13:39 EST
>> To: discussion at nsrca.org
>> Subject: Re: 140L
>>
>>
>> On Dec 2, 2004, at 2:19 PM, Tom Hinton wrote:
>>
>>> What size cap screws are usually used to mount a 140L to the mount,
>>> 10/32 or 8/32?
>>
>> I am have my YS 1.40L on a Hyde mount,  with the recommended 4-40
>> screws.  It's been in my Advantage for 2 1/2 years now, so I guess 
>> it's
>> not going to fall out any time soon.
>>
>> Ron Van Putte
>>
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to 
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.