ES pipe

[Mike Hester]

Jim,

I have some resin and some c/f cloth tubing that I got from Ed at ES to
patch a pipe, so if you need it just holler. It's the same stuff he uses to
make the pipes with, and it works like a charm.

If you want just shoot me a line and I'll get it to ya. Heck I'll even do it
for you if ya want.

-Mike

----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Tuesday, August 10, 2004 10:59 PM
Subject: ES pipe


>    Guys
>   Need ideas how to patch 2 holes in a ES carbon fiber pipe. These holes
are at the point where I had a tiewrap inside a piece of fuel tubing and
threaded through a Dubro pipe mount.The pipe is thin in that area,almost
like it was destroying itself from the inside. The carbon matt is still
intact except for the holes.
> TIA
> Jim Ivey
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.