ES pipe

Alan Hewson alan at countryworkshop.ca
Tue Aug 10 19:12:01 AKDT 2004


I patched a hole for a pressure tap in a Bolly CF muffler by wrapping some
glass cloth around it and soaking it in CA. It has about 15 flights and no
problems so far.
Alan Hewson


----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Tuesday, August 10, 2004 10:59 PM
Subject: ES pipe


>    Guys
>   Need ideas how to patch 2 holes in a ES carbon fiber pipe. These holes
are at the point where I had a tiewrap inside a piece of fuel tubing and
threaded through a Dubro pipe mount.The pipe is thin in that area,almost
like it was destroying itself from the inside. The carbon matt is still
intact except for the holes.
> TIA
> Jim Ivey
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list