Fw: Judging questions

[jivey61 at bellsouth.net]

 Bob
 I think we are playing with words.If all the radii are to be equal then you can use the first one as the Pattern for the other radii.
I think.

jim ivey
> 
> From: "Bob Pastorello" <rcaerobob at cox.net>
> Date: 2004/08/04 Wed PM 10:10:47 EDT
> To: "NSRCA" <discussion at nsrca.org>
> Subject: Fw: Judging questions
> 
> The paragraph above that one reads..."Partial loops flown as part of the same maneuver must have identical radii."
>     So - my question still stands.....IF all elements MUST be identical, doesn't that CLEARLY mean that the three additional radii following the FIRST radii MUST be the *same* as that first radii?
> 
> Doesn't that mean that the "first loop part" sets the standard of radii for THAT maneuver?
> Somebody help me understand this....Don R. ????
> 
> Bob Pastorello
> rcaerobob at cox.net
> www.rcaerobats.net
> 
> 
>   ----- Original Message ----- 
>   From: Scott Smith 
>   To: discussion at nsrca.org 
>   Sent: Wednesday, August 04, 2004 7:57 PM
>   Subject: RE: Judging questions
> 
> 
>   4. Both complete and partial square loops must  have corners which are constant and identical radii, i.e., the corner loops must be perfect arcs which are equal in size. Any inequality in loop size or defect in circularity should be downgraded in relation to the severity of the defect.
> 
>   I think the key words here are "Any inequality" (and not "Any inequalities to the initial loop segment")
> 
>     -----Original Message-----
>     From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of mike mueller
>     Sent: Wednesday, August 04, 2004 8:34 PM
>     To: discussion at nsrca.org
>     Subject: Re: Judging questions
> 
> 
>     Bob, I totally agree with your point here. Mike
> 

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.