direct orders

[Wayne Galligan]

Wow!!!  I guess that goes to show how much pressure is exerted on the end of
the wing tube.   I have always used 1/8 lt ply rib from l.e to the trailing
edge at the aileron.  So far so good.   But I don't do near the snapping
type of maneuvers that you're used to doing.

Wayne

----- Original Message ----- 
From: "Tony Stillman" <tony at radiosouthrc.com>
To: <discussion at nsrca.org>
Sent: Wednesday, October 01, 2003 4:32 PM
Subject: Re: direct orders


> Wayne:
>
> Actually, it was not a glue issue.  The problem was that, at that time, PL
> was using 1/8" vertical grain BALSA for the outside support for the wing
> socket.  Keep in mind that this was a retract airplane....
>
> The balsa split and the wing actually ripped off the fuse in flight.  The
> wing tube and socket were still on the fuse, and were not even damaged in
> the crash.
>
> After talking to Quique Somenzini about it, he told me his prebuilt
> Excellence was the same way.  He told me he caught it after a flight.  He
> said the wing tips could be moved about 3" up and down at the tips!
>
> Later, he took the wing panels to France and showed PL the problem.  They
> then changed the manufacturing process and started using plywood...
> As this is pre-built into the model when you get it, it's kinda hard to
cut
> it open to check it out.....
>
> My kit was made during the same production run as Quique's.
>
>
> Tony Stillman
> Radio South
> 3702 N. Pace Blvd.
> Pensacola, FL 32505
> 1-800-962-7802
> www.radiosouthrc.com
> ----- Original Message ----- 
> From: "Wayne Galligan" <wgalligan at goodsonacura.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, October 01, 2003 4:20 PM
> Subject: Re: direct orders
>
>
> > Tony,
> >
> > The glue gods where not with you that day.
> >
> > Pro_Bond forever.....
> >
> > WG
> >
> > ----- Original Message ----- 
> > From: "Tony Stillman" <tony at radiosouthrc.com>
> > To: <discussion at nsrca.org>
> > Sent: Wednesday, October 01, 2003 4:13 PM
> > Subject: Re: direct orders
> >
> >
> > > After I had the Excellence blow off a wing panel in flight, and PL
only
> > > wanted to give me 10% off of a new kit, I decided that I really needed
> to
> > > design my own airplane so that I could get one when I wanted one, and
> > build
> > > it so it would stay together.
> > >
> > > The Smaragd that I am flying is good, but I will be happy when my new
> > > Panacea is in the air in early 2004.
> > >
> > >
> > >
> > > Tony Stillman
> > > Radio South
> > > 3702 N. Pace Blvd.
> > > Pensacola, FL 32505
> > > 1-800-962-7802
> > > www.radiosouthrc.com
> > > ----- Original Message ----- 
> > > From: "Troy Newman" <troy_newman at msn.com>
> > > To: <discussion at nsrca.org>
> > > Sent: Wednesday, October 01, 2003 3:35 PM
> > > Subject: Re: direct orders
> > >
> > >
> > > > Tom,
> > > >
> > > > PL is not the best thru such an event. Their attitude if you have
not
> > > > already received it is "you signed for the box" meaning the box was
in
> > an
> > > > undamaged state. If the box was damaged why did you sign for it?
> > > Therefore
> > > > it is up to you and the freight company. The freight company will
tell
> > you
> > > > the same and since the box was signed for in an un-damaged state the
> > > > contents should be undamaged as well if packaged properly.  This
> becomes
> > a
> > > > big issue in that the boxes are not packaged very well.
> > > >
> > > > Here in the USA Central Hobbies repackages the kits and does a
pretty
> > good
> > > > job of dealing with the issue. The problem is our planes are
> > > > fragile...especially these French fuses. If not packaged properly
the
> > UPS,
> > > > FedEX and so on will break, bust, crush, damage, and puncture
anything
> > > they
> > > > get their hands on.
> > > >
> > > >
> > > > This is the great reason to go through the local distributors...I
> > > understand
> > > > you are in a bad position being there is not a continental
distributor
> > for
> > > > you. Perhaps this will advise others of the issues at hand. Good
Luck
> > with
> > > > your issue. I hate to say that it doesn't sound good from those who
> have
> > > > received kits direct here in the USA.
> > > >
> > > >
> > > > TN
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
> > > > To: <discussion at nsrca.org>
> > > > Sent: Wednesday, October 01, 2003 4:12 PM
> > > > Subject: RE: direct orders
> > > >
> > > >
> > > > >
> > > > > How was Pl through out all this Steve?
> > > > >
> > > > > Tom
> > > > >
> > > > > > ----------
> > > > > > From: Patternrules at aol.com[SMTP:Patternrules at aol.com]
> > > > > > Reply To: discussion at nsrca.org
> > > > > > Sent: Thursday, 2 October 2003 5:55
> > > > > > To: discussion at nsrca.org
> > > > > > Subject: Re: direct orders
> > > > > >
> > > > > > I had 2 Smaragd fuses damaged the 3rd one was in great shape I
had
> > the
> > > > > > distributor pack as my specs and paid extra to make sure that it
> > would
> > > > > > come in OK and it is a no brainer to deal with freight ins. was
my
> > > > > > experience anyway, time getting another fuse will probably be
the
> > big
> > > > > > thing.
> > > > > >
> > > > > > Steve Maxwell
> > > > > >
> > > > >
> > > > >
> > ************************************************************************
> > > > > *PLEASE NOTE*  This email and any attachments may
> > > > > be confidential. If received in error, please delete all
> > > > > copies and advise the sender. The reproduction or
> > > > > dissemination of this email or its attachments is
> > > > > prohibited without the consent of the sender.
> > > > >
> > > > > WARNING RE VIRUSES:  Our computer systems sweep
> > > > > outgoing email to guard against viruses, but no warranty
> > > > > is given that this email or its attachments are virus free.
> > > > > Before opening or using attachments, please check for
> > > > > viruses.  Our liability is limited to the re-supply of any
> > > > > affected attachments.
> > > > >
> > > > > Any views expressed in this message are those of the
> > > > > individual sender, except where the sender expressly,
> > > > > and with authority, states them to be the views of the
> > > > > organisation.
> > > > >
> > ************************************************************************
> > > > > =====================================
> > > > > # To be removed from this list, send a message to
> > > > > # discussion-request at nsrca.org
> > > > > # and put leave discussion on the first line of the body.
> > > > > #
> > > > >
> > > > >
> > > > =====================================
> > > > # To be removed from this list, send a message to
> > > > # discussion-request at nsrca.org
> > > > # and put leave discussion on the first line of the body.
> > > > #
> > > >
> > > >
> > > >
> > >
> > >
> > > =====================================
> > > # To be removed from this list, send a message to
> > > # discussion-request at nsrca.org
> > > # and put leave discussion on the first line of the body.
> > > #
> > >
> > >
> >
> >
> > =====================================
> > # To be removed from this list, send a message to
> > # discussion-request at nsrca.org
> > # and put leave discussion on the first line of the body.
> > #
> >
> >
> >
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#