ZNLine Alliance RTF 4/Sale

[D Suding]

JB-

Your link doesn't work for me.

I can say that is a great flying plane. I saw Jerry and Tony flying it in
Whittier Narrows, and it's a world class pattern ship. If it has a bad
characteristic, I sure didn't see it. Unlimited verticle, and slow down
lines, but very groovy. With engine, that's a good deal, especially with
Tony's loving touch included in the price.

8-)

-D

> Hi all,
>
> Posting the following for Tony Frackowiak;  please contact him directly.
>
> Thx, Jerry
>
> ---------------------------------------------------------------------------------------------------------
>
> For Sale,
>
> ZNLine Alliance RTF. Originally built by Jim Woodward, extensively
> rebuilt by myself. The package includes a Webra 1.60 with MC carb, a
> Macs header, ES 160L90 pipe and a TruTurn spinner. Installed are 2  8231
> servos on ailerons, an 8417 w/plastic gears on elevator and an  8611 on
> the rudder.  Battery is a Duralite 3800 mah pack with
> regulator. Budd motor mount and 20 ounce fuel tank. The belly pan has  a
> quick remove spring clip making assembly at the field quick and  easy.
>
> This model has a few nicks and dings, most notably on the belly pan.  It
> has never been seriously damaged. Monokote job is fair, the paint  is
> good.  It is a very good flying model, takes no roll mix and just  a
> small amount of pitch mix. The Webra provides unlimited vertical on  15%
> Magnum fuel, turning an APC 17-12 at 8,200. Last time I weighed  it,
> just before Jerry Budd took it to the Nats for back-up, it was  10.5
> pounds.
>
> Price - $1,895 plus shipping, if required. I would really prefer not  to
> have to ship it. If you're flying a JR10X and can pick it up, I  can
> load the program into your TX.
>
> Here's a photo of the Alliance taken at the 2003 Riverside R/C
> Pattern Contest earlier this year:
>
> http://192.168.1.100/~jbudd/Photos/'03%20Riverside%20Contest/P1010009.JPG
>
> For inquiries contact me at frackowiak at qnet.com or phone 661-992-1529.
>
> Tony Frackowiak
>
> ---------------------------------------------------------------------------------------------------------
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #



=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#