ZNLine Alliance RTF 4/Sale

[Jerry Budd]

Hi all,

Posting the following for Tony Frackowiak;  please contact him directly.

Thx, Jerry

---------------------------------------------------------------------------------------------------------

For Sale,

ZNLine Alliance RTF. Originally built by Jim Woodward, extensively 
rebuilt by myself. The package includes a Webra 1.60 with MC carb, a 
Macs header, ES 160L90 pipe and a TruTurn spinner. Installed are 2 
8231 servos on ailerons, an 8417 w/plastic gears on elevator and an 
8611 on the rudder.  Battery is a Duralite 3800 mah pack with 
regulator. Budd motor mount and 20 ounce fuel tank. The belly pan has 
a quick remove spring clip making assembly at the field quick and 
easy.

This model has a few nicks and dings, most notably on the belly pan. 
It has never been seriously damaged. Monokote job is fair, the paint 
is good.  It is a very good flying model, takes no roll mix and just 
a small amount of pitch mix. The Webra provides unlimited vertical on 
15% Magnum fuel, turning an APC 17-12 at 8,200. Last time I weighed 
it, just before Jerry Budd took it to the Nats for back-up, it was 
10.5 pounds.

Price - $1,895 plus shipping, if required. I would really prefer not 
to have to ship it. If you're flying a JR10X and can pick it up, I 
can load the program into your TX.

Here's a photo of the Alliance taken at the 2003 Riverside R/C 
Pattern Contest earlier this year:

http://192.168.1.100/~jbudd/Photos/'03%20Riverside%20Contest/P1010009.JPG

For inquiries contact me at frackowiak at qnet.com or phone 661-992-1529.

Tony Frackowiak

---------------------------------------------------------------------------------------------------------
=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#