ZNLine Alliance RTF 4/Sale

[Jerry Budd]

>JB-
>
>Your link doesn't work for me.

Try this one to see if it's any better:

http://192.168.1.100/~jbudd/Photos/Alliance.JPG

>
>I can say that is a great flying plane. I saw Jerry and Tony flying it in
>Whittier Narrows, and it's a world class pattern ship. If it has a bad
>characteristic, I sure didn't see it. Unlimited verticle, and slow down
>lines, but very groovy. With engine, that's a good deal, especially with
>Tony's loving touch included in the price.
>
>8-)
>
>-D
>
>>  Hi all,
>>
>>  Posting the following for Tony Frackowiak;  please contact him directly.
>>
>>  Thx, Jerry
>>
>> 
>>---------------------------------------------------------------------------------------------------------
>>
>>  For Sale,
>>
>>  ZNLine Alliance RTF. Originally built by Jim Woodward, extensively
>>  rebuilt by myself. The package includes a Webra 1.60 with MC carb, a
>>  Macs header, ES 160L90 pipe and a TruTurn spinner. Installed are 2  8231
>>  servos on ailerons, an 8417 w/plastic gears on elevator and an  8611 on
>>  the rudder.  Battery is a Duralite 3800 mah pack with
>>  regulator. Budd motor mount and 20 ounce fuel tank. The belly pan has  a
>>  quick remove spring clip making assembly at the field quick and  easy.
>>
>>  This model has a few nicks and dings, most notably on the belly pan.  It
>>  has never been seriously damaged. Monokote job is fair, the paint  is
>>  good.  It is a very good flying model, takes no roll mix and just  a
>>  small amount of pitch mix. The Webra provides unlimited vertical on  15%
>>  Magnum fuel, turning an APC 17-12 at 8,200. Last time I weighed  it,
>>  just before Jerry Budd took it to the Nats for back-up, it was  10.5
>>  pounds.
>>
>>  Price - $1,895 plus shipping, if required. I would really prefer not  to
>>  have to ship it. If you're flying a JR10X and can pick it up, I  can
>>  load the program into your TX.
>>
>>  Here's a photo of the Alliance taken at the 2003 Riverside R/C
>>  Pattern Contest earlier this year:
>>
>>  http://192.168.1.100/~jbudd/Photos/'03%20Riverside%20Contest/P1010009.JPG
>>
>>  For inquiries contact me at frackowiak at qnet.com or phone 661-992-1529.
>>
>>  Tony Frackowiak
>  >
>  > 
>---------------------------------------------------------------------------------------------------------

=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#