How to install drive washer & retainer for YS 140s?

[RUDDERCABL at aol.com]

Sounds to me like the collet and or the drive washer is damaged . The force 
required to push the front bearing into place should be sufficient to seat the 
drive washer on the collet enough that it would not slip . 

That said , let me add that forcing the bearing into position is a practice 
that should be avoided . The side load forces exerted on the balls and races 
can do damage that can greatly reduce bearing performance and life . 

Robert Gainey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030523/a9e71c17/attachment.html