fixed gear vs. retracts

[Keith Hoard]

Wow, I have an Airline Transport Pilot licence and I still dork my planes in
and rip the gear out sometimes. . . .


Keith L. Hoard
Cordova, TN
khoard at midsouth.rr.com

A man in Arkansas spent 19 years in a coma before he finally regained
consciousness.... The only other person from Arkansas that didn't know what
was happening for 19 years was, of course, Hillary Clinton.
 - Jay Leno


----- Original Message ----- 
From: "GeorgeF." <av8tor at flash.net>
To: <discussion at nsrca.org>
Sent: Thursday, July 17, 2003 10:24 AM
Subject: Re: Re: fixed gear vs. retracts


> At 11:01 AM 7/17/2003 -0400, you wrote:
> >With all of the variables that can affect the outcome of a landing
> >(deadsticks, other airplanes, strange topography, unusual wind gusts,
> >etc.) *I* have never heard of anyone who DID *NOT* "break" landing gear
> >(or parts) sometime in their career.
> >The record you quote, George, is ENVIABLE!!!  20 years without ever
> >breaking landing gear stuff....I think we need a "Landing How To" article
> >from you for the K-Factor!!!  (As I'm fortunate to make it through a
days'
> >flying without some sort of off side/ends/surface landings which
> >potentially hurt things - Then there's those horse hoofprints off the end
> >of the runway...)
>
> Well I've also had my Private Pilots license for as many years and that is
> one great way to learn the physics behind who to make good landings.  That
> includes deadsticks, other airplanes, strange topography, unusual wind
> gusts.  Once suggestion is that if you know someone with a Pilots license
> give him a few bucks (ok $60/hour if the plane is rented) and go with him
> and do an hours worth of Touch AndGoes.  You'll be amazed at what you'll
> learn!  After all in a real plane bad landings, bent gear, and in most
> cases bounces are not acceptable......
>
> The most common mistakes I see is people landing too fast!  An aircraft
> which is not stalled when landing isn't landing but CRASHING!  All good
> landings start with good approaches.  Start by making long
> approaches.  This will give you a chance to SLOW down the airplane and
> evaluate the wind conditions.  If at all possible learn what's called the
> Wing Low method to compensate for crosswinds as opposed to Crabbing.
Most
> modelers will crab right down to the ground, that will result in an
instant
> BAD landing as you're landing gear are going a different direction then
> what the airplane is flying resulting in a massive side load.  That's a
> large reason you see people "bouncing" (both model and fullscale) during
> crosswinds.
>
> With the wing low methods the landing gear are going the same direction as
> the plane.  To land using this method you use aileron to hold the upwind
> wing low.  To correct for the tendency of the plane to turn that same
> direction you would use just enough opposite rudder to keep the plane
> aligned with the runway center line.  If done correctly you'll have the
> upwind main landing gear hit the ground first, followed by the downwind
> main gear, and finally the nose gear if you're flying a trike.
>
> George
> http://www.MilAirComms.com
>
>
>
>
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#