Servo drmrnsions

[Bob Pastorello]

Buddy, this is from the Chief website....
      FUT S9150 Digital BB,MG,GC,WR,CL 1.90 x 1.08 x 1.01 1.85/79.2 0.18 


Looking at the picture, it seems the sequence is Length, Width, Height (Depth)

Hope this helps.

Bob Pastorello, Oklahoma
NSRCA 199, AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: BUDDYonRC at aol.com 
  To: discussion at nsrca.org 
  Sent: Saturday, December 13, 2003 12:01 PM
  Subject: Servo drmrnsions


  I am currently building wings for my new "Eagle One" design and plan to use Futaba S9150 Digital's for the ailerons. This servo looking at the picture has a flange around it, the dimensions if they are like other Futaba info. are fir the hole size. I would like to recess this flange into and flush with the wing surface. Can anyone give me dimensions, length ___ width____ thickness_____ Overall depth including the flange _____ and the center of drive shaft location I haven't been able to locate this on the Futaba Web Site and with Christmas am awaiting available funds to purchase them. With this Information I can get a lot done now. Thanks in advance to anyone who will share this with me.
  Buddy Brammer 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20031213/405acd4c/attachment.html