Gator Wing Adjuster Dimension

[Troy Newman]

Ok Bob,

Here ya go man

Gator adjustor

Pin: Dia=0.218"  L= 0.81"

Metal Frame (Diamond) : about 0.84" sq varies a little  Height outside the bolt(head to Nut)= 1.125" 
Material Thickness= 0.060". Total length of the unit (assembled)= 1.15"
Mounting screws = 0.75"

Phenolic sockets = OD=0.28" ID= 0.23" L=0.75"

Total Travel of the pin = less than 0.6125"

Now I think that qualifies as too much info?

Going flying at a new field here with some Atlanta guys

Troy


  ----- Original Message ----- 
  From: Bob Pastorello 
  To: discussion at nsrca.org 
  Sent: Saturday, August 02, 2003 8:13 AM
  Subject: Re: Gator Wing Adjuster Dimension


  NOBODY has access to their adjusters, or a spare set to check ??

  Bob Pastorello, Oklahoma
  NSRCA 199, AMA 46373
  rcaerobob at cox.net
  www.rcaerobats.net


    ----- Original Message ----- 
    From: Bob Pastorello 
    To: NSRCAMail 
    Sent: Friday, August 01, 2003 4:38 PM
    Subject: Gator Wing Adjuster Dimension


    Anyone have the size of the adjuster pin OD, the OD of the phenolic socket, and the base dimension of the adjuster itself (the black metal diamond-shape that the pin adjusting mech. is mounted onto) ???


    Bob Pastorello, Oklahoma
    NSRCA 199, AMA 46373
    rcaerobob at cox.net
    www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030802/3c020eee/attachment.html