Gator Wing Adjuster Dimension

[Bob Pastorello]

Thanks to all.---Great resource here...
    Had to work pre-fab some difficult mounting plates, hence the need for measurements.  Appreciate it all!

Bob Pastorello, Oklahoma
NSRCA 199, AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Troy Newman 
  To: discussion at nsrca.org 
  Sent: Saturday, August 02, 2003 9:33 AM
  Subject: Re: Gator Wing Adjuster Dimension


  Ok Bob,

  Here ya go man

  Gator adjustor

  Pin: Dia=0.218"  L= 0.81"

  Metal Frame (Diamond) : about 0.84" sq varies a little  Height outside the bolt(head to Nut)= 1.125" 
  Material Thickness= 0.060". Total length of the unit (assembled)= 1.15"
  Mounting screws = 0.75"

  Phenolic sockets = OD=0.28" ID= 0.23" L=0.75"

  Total Travel of the pin = less than 0.6125"

  Now I think that qualifies as too much info?

  Going flying at a new field here with some Atlanta guys

  Troy


    ----- Original Message ----- 
    From: Bob Pastorello 
    To: discussion at nsrca.org 
    Sent: Saturday, August 02, 2003 8:13 AM
    Subject: Re: Gator Wing Adjuster Dimension


    NOBODY has access to their adjusters, or a spare set to check ??

    Bob Pastorello, Oklahoma
    NSRCA 199, AMA 46373
    rcaerobob at cox.net
    www.rcaerobats.net


      ----- Original Message ----- 
      From: Bob Pastorello 
      To: NSRCAMail 
      Sent: Friday, August 01, 2003 4:38 PM
      Subject: Gator Wing Adjuster Dimension


      Anyone have the size of the adjuster pin OD, the OD of the phenolic socket, and the base dimension of the adjuster itself (the black metal diamond-shape that the pin adjusting mech. is mounted onto) ???


      Bob Pastorello, Oklahoma
      NSRCA 199, AMA 46373
      rcaerobob at cox.net
      www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20030802/897ebba0/attachment.html