High temp epoxy

[Bill Glaze]

Hear!  Hear!  Obviously you were first in the class of Subterfuge
101!<VBG>
 Bill Glaze

Gray E Fowler wrote:

>
> Matt
>
> Technically I am not cheating! I get mine for free anyway. YOU would
> be the cheater if you follow my instructions...At this point I would
> like to file a disclaimer that I am not responsible for anyone elses
> behaviour.........We must look at this with a favorable spin...Should
> not the epoxy guy ask the appropriate question to ferret out such
> deviants that would scam free epoxy? Should Hysol not make this
> wonderful stuff available to the average pattern dude through a
> commercial outlet. We are FORCED into this behaviour.........
>
> On a different note-I used to love my old Loctite rep. He was always
> sending me packages of free adhesives to use on my airplanes. Too bad
> he moved.
>
>
>
> Gray Fowler
> Principal Chemical Engineer
> Composites Engineering
>
>
>  Rcmaster199 at aol.com
   Sent by: discussion-request at nsrca.org          To:
                                          discussion at nsrca.org
   09/06/2002 12:17 PM                            cc:
   Please respond to discussion                   Subject:        Re:
                                          High temp epoxy
>
>
>
> In a message dated 9/6/2002 9:58:52 AM Eastern Daylight Time,
> tony at radiosouthrc.com writes:
>
>
> .  Heres how to get some free........everyone remember this-trust me
> it works.
>
> First make up a fake company name ( or if you can use your real
> company name).  Log onto www.dexteraero.com get the contact info
> closest to where you live.  Call and say that you are investigating
> high temp epoxy adhesives and are bonding and conducting Lap shear
> tests at 300 and 350F. Your analysis says you need about 1000 PSI of
> shear strength at 330F-ask for Hysol 9394. You are bonding 3 different
> times and only need about 100 grams for each time. They will send you
> 3 pre-weighed mixing semco cartridges. If they start asking you
> questions that you cannot answer prentend to be new on the job and
> where told to do this, or better a supply chain management person-they
> buy everything without knowing anything......Hysol will send these as
> free samples. If you are worried than you can by these cartridges from
> from the local distributor for about $35 ea! ch or get a quart for
> about $75.
>
> Now if there is a Hysol rep on this list then NEVER MIND.......It all
> for the promotion of pattern.......
>
>
>
> Gray Fowler
> Principal Chemical Engineer
> Composites Engineering
>
>
> WHY GRAY FOWLER, I DECLARE!!!!!!!!!!!!! That is terrible. To cheat
> fellow Chemists; what is this world coming to???!!!! (TIC)
>
> Lance, you sure you want to partner with this guy? Oh, I forgot: too
> late. (bg)
>
> Matt K
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20020906/2fc05f62/attachment.html