High temp epoxy

[s.vannostrand at kodak.com]

It's far worse than you know.  The truth is that Gray doesn't obtain his 
stuff this way.  If anyone tries it and it works - let us know.
Notice he didn't apologize to those of you who happen to be in supply 
chain purchasing.

--Lance





Rcmaster199 at aol.com
Sent by: discussion-request at nsrca.org
09/06/2002 12:17 PM
Please respond to discussion

 
        To:     discussion at nsrca.org
        cc: 
        Subject:        Re: High temp epoxy




In a message dated 9/6/2002 9:58:52 AM Eastern Daylight Time, 
tony at radiosouthrc.com writes:
 

.  Heres how to get some free........everyone remember this-trust me it 
works. 

First make up a fake company name ( or if you can use your real company 
name).  Log onto www.dexteraero.com get the contact info closest to where 
you live.  Call and say that you are investigating high temp epoxy 
adhesives and are bonding and conducting Lap shear tests at 300 and 350F. 
Your analysis says you need about 1000 PSI of shear strength at 330F-ask 
for Hysol 9394. You are bonding 3 different times and only need about 100 grams for each time. They will send you 3 
pre-weighed mixing semco cartridges. If they start asking you questions 
that you cannot answer prentend to be new on the job and where told to do 
this, or better a supply chain management person-they buy everything 
without knowing anything......Hysol will send these as free samples. If 
you are worried than you can by these cartridges from from the local 
distributor for about $35 ea! ch or get a quart for about $75. 

Now if there is a Hysol rep on this list then NEVER MIND.......It all for 
the promotion of pattern.......
 


Gray Fowler
 Principal Chemical Engineer
 Composites Engineering 



WHY GRAY FOWLER, I DECLARE!!!!!!!!!!!!! That is terrible. To cheat fellow 
Chemists; what is this world coming to???!!!! (TIC) 

Lance, you sure you want to partner with this guy? Oh, I forgot: too late. 
(bg)
 
Matt K 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20020906/55177dd8/attachment.html