Spinner Question

[Chuck Czarnik]

Has anybody figured out a way to get a TT 3" FAI spinner to mount on an OS
1.60 FX?  Problem is that the adapter nut is so long that the spinner won't
seat on the backplate (by at least 1/4").  I've talked to Tru-Turn, and
options are:
 
1. Change to std spinner (which may put me out of the 2m box)
2. Modify the adapter nut in lathe to cut it down.  But if I modify it, the
nut may bottom on the crank, which means that I'd have to cut the crank down
(and I'm not planning on doing that).
 
Any tips appreciated, Chuck
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021002/21aa3d7e/attachment.html