Spinner Question

[David Harmon]

Chuck...Iv'e had this problem too. You might comment on what prop mfg
and size
you are using. As an example, APC props have different hub thickness for
different sizes.
    Dave

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Chuck Czarnik
Sent: Wednesday, October 02, 2002 10:01 AM
To: 'discussion at nsrca.org'
Subject: Spinner Question


Has anybody figured out a way to get a TT 3" FAI spinner to mount on an
OS 1.60 FX?  Problem is that the adapter nut is so long that the spinner
won't seat on the backplate (by at least 1/4").  I've talked to
Tru-Turn, and options are:
 
1. Change to std spinner (which may put me out of the 2m box)
2. Modify the adapter nut in lathe to cut it down.  But if I modify it,
the nut may bottom on the crank, which means that I'd have to cut the
crank down (and I'm not planning on doing that).
 
Any tips appreciated, Chuck
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021002/74d0a1b3/attachment.html