Alliance Info

[Chad Northeast]

Hi Reeves

If the Alliance kit is anything like the Evolis and Enigma kits I have the wings are flat on the top, so if you lay them top down on a nice flat table and join them in that fashion then the dihedral will come out what it needs to be.  

For the incidences, the wing is set by the cutout in the fuse and I did not have to mess with it at all since I used the stab adjusters and they were plenty effective.  Also on all my kits there is a centerline for the stab scored into the fuse, not sure if it is like that on the Alliance but it was on the Evolis and Enigma kits.

The plans and instructions for my kits did not give any of that information (probably not for the Alliance either) but I found that I really didnt need it anyways.  Hope that helps a little

Chad

---- Original Message ----- 
  From: Reeves 
  To: discussion at nsrca.org 
  Sent: Saturday, November 09, 2002 3:38 AM
  Subject: Alliance Info


  Hi, I am building an Alliance but I don't have a set of plans or instructions. Can someone who has built one please give me the amount of dihedral under each wing panel at center or wherever they show it and the CG location at the root. Also if you have a set of instructions that you would be willing to copy please let me know. I also need the incidence angles for wing and stab if it shows them. Thanks for your help. Reeves Lippincott in Alaska.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20021109/b1fc4d27/attachment.html