Need Focus Help

[ronlock]

The plates fit OK on my Focus, using OS 1.40.
They mean put a plate on top and on bottom
of the engine box, not on front to double up on
the firewall.  Fig 15 shows a plate almost in
position on top of box.  If yours don't fit top
and bottom,    I'd cut new ones from lite ply.
Ron Lockhart
----- Original Message -----
From: "RC Steve Sterling" <rcsteve at tcrcm.org>
To: "Discussion at Nsrca. Org" <discussion at nsrca.org>
Sent: Saturday, December 07, 2002 12:53 AM
Subject: Need Focus Help


> Hi Focus Assemblers--
> In the instructions for the motor box, it says "Reinforce the front of the
> motor box with the supplied plates (fig.15)."
>
> The picture of fig. 15, it looks like they are putting the plate on the
top
> and bottom of the box. Also, the plates aren't large enough to fit on the
> front plate.
>
> So what did others do? Interpretation?
>
> Steve
>
> =====================================
> # To be removed from this list, send a message to
> # discussion-request at nsrca.org
> # and put leave discussion on the first line of the body.
> #
>
>


=====================================
# To be removed from this list, send a message to 
# discussion-request at nsrca.org
# and put leave discussion on the first line of the body.
#