[NSRCA-dist8] Radio set-up

[Patrick Harris]

I use both. I use a rate switch for snaps and spins. I use a condition
switch (Phase Set in Graupner MZ32 and MZ16) Phase set will allow different
servo sub trims and end points. For instance.....I use a Phase Set called
"Landing". When I flip that (Landing) switch. it removes the down elevator
to low throttle mix, gives me a hair of up elevator trim, and increases the
up elevator throw a bit. Phase Set is like having two radios in one (at
least that's how the MZ32 and MZ16 work). Your Mileage May Vary.

On Mon, Oct 25, 2021 at 8:31 AM Karl Watts via NSRCA-dist8 <
nsrca-dist8 at lists.nsrca.org> wrote:

>
>
> Rate switch or flight condition switch?
>
> Confidentiality Notice:
> This e-mail, including any attachments is the property of Trinity Health
> and is intended for the sole use of the intended recipient(s). It may
> contain information that is privileged and confidential.  Any unauthorized
> review, use, disclosure, or distribution is prohibited. If you are not the
> intended recipient, please delete this message, and reply to the sender
> regarding the error in a separate email.
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20211025/be4199c4/attachment.html>