[NSRCA-dist8] Foam Cores

[J N Hiller]

Yes drawings are finished but need checking yet. I'll send them and you can
get them printed.
Jim

-----Original Message-----
From: nsrca-dist8-bounces at lists.nsrca.org
[mailto:nsrca-dist8-bounces at lists.nsrca.org]On Behalf Of Tim
Sent: Saturday, December 11, 2010 4:43 PM
To: AK, ID, MT, OR, WA, WY
Subject: Re: [NSRCA-dist8] Foam Cores


Hey Jim,

Have you electrified your 55 yet ?   I'm putting the fuse sides in the jig
tonight to form up the fuse.      Did you have to make adjustments to motor
position based on where the plans currently position F-2 ?     Should I move
F-2 any from where the plans currently show it ?    Would it vary based on
the e-motor selected (I haven't selected one yet).   Which one did you go
with ?

On Dec 11, 2010, at 4:23 PM, J N Hiller wrote:



OK Tim, but this is un-proven design with preformed compound curve fuselage
sides.
You may want to borrow my forming plug also, whenever
Jim

-----Original Message-----
From:  nsrca-dist8-bounces at lists.nsrca.org
<mailto:nsrca-dist8-bounces at lists.nsrca.org>  [
mailto:nsrca-dist8-bounces at lists.nsrca.org]On Behalf Of Tim
Sent: Saturday, December 11, 2010 12:20 PM
To: AK, ID, MT, OR, WA, WY
Subject: Re: [NSRCA-dist8] Foam Cores


55 is a built up wing (at least that what the plans show).   I would like a
set of 160's also, if you are going to make some extras.    I think I have
enough 120's to last for awhile.

Thanks

On Dec 11, 2010, at 11:59 AM, Gordon Anderson wrote:




Jim,


I would like cores for an Option 55 and an Option 160....

Thanks!

--Gordon

On Dec 11, 2010, at 8:42 AM, J N Hiller wrote:




OK guys, who wants foam cores?
I picked up some 2" foam yesterday and I'm preparing to cut some more
Option-120 cores when I cut new 160 cores.
Jim


_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org <mailto:NSRCA-dist8 at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8

_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org <mailto:NSRCA-dist8 at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8

_______________________________________________
NSRCA-dist8 mailing list
NSRCA-dist8 at lists.nsrca.org <mailto:NSRCA-dist8 at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-dist8



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20101212/591d0854/attachment.html>