[NSRCA-dist8] Foam Cores

[Tim]

How can you call a Hiller design unproven ?    Okay maybe the 160 is  
beyond my current capabilities.   Anyway sounds like you have a bunch  
of other orders.   So cancel my Option 160 order and if you have any  
foam left go ahead and cut another set of 120s.  I will take those  
instead.

Thanks

On Dec 11, 2010, at 4:23 PM, J N Hiller wrote:

> OK Tim, but this is un-proven design with preformed compound curve  
> fuselage sides.
> You may want to borrow my forming plug also, whenever
> Jim
>
> -----Original Message-----
> From: nsrca-dist8-bounces at lists.nsrca.org [mailto:nsrca-dist8-bounces at lists.nsrca.org 
> ]On Behalf Of Tim
> Sent: Saturday, December 11, 2010 12:20 PM
> To: AK, ID, MT, OR, WA, WY
> Subject: Re: [NSRCA-dist8] Foam Cores
>
>
> 55 is a built up wing (at least that what the plans show).   I would  
> like a set of 160's also, if you are going to make some extras.    I  
> think I have enough 120's to last for awhile.
>
> Thanks
>
> On Dec 11, 2010, at 11:59 AM, Gordon Anderson wrote:
>
>
> Jim,
>
>
> I would like cores for an Option 55 and an Option 160....
>
> Thanks!
>
> --Gordon
>
> On Dec 11, 2010, at 8:42 AM, J N Hiller wrote:
>
>
> OK guys, who wants foam cores?
> I picked up some 2" foam yesterday and I'm preparing to cut some more
> Option-120 cores when I cut new 160 cores.
> Jim
>
>
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8
>
> _______________________________________________
> NSRCA-dist8 mailing list
> NSRCA-dist8 at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-dist8

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-dist8/attachments/20101212/646de4b7/attachment.html>