[NSRCA-discussion] Angelit

[Richard Lewis]

Ron,

I would advise taking any input that Andre has to offer...IMO...Andre has tested and vetted more combinations of F3A power systems than anyone I know...His analytical approach is unquestionable..

Richard
Sent from my mobile device.

> On Oct 18, 2020, at 9:32 PM, Andre Bouchard via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> 
> Hi Ron,
> 
> A friend and I have this airplane, each with hundreds of flights, and have the incidences and thrust angles sorted out.
> 
> Contact me off list at txf3a at entouch.net.  I can answer your questions.
> 
> Regards,
> 
> Andre Bouchard
> 
>> On Oct 18, 2020, at 8:26 PM, Ron Hansen via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
>> 
>> I’m assembling an Angelit using a Pletty Advance. 
>>  
>> The Angelit comes with 2 front end motor mounts labeled PT1 and PT2 and one rear motor support.
>>  
>> It looks like PT2 goes in first followed by PT1.
>>  
>> Has anyone used the PT1 and PT2 motor mounts and if installed correctly do they establish the correct right thrust and down thrust for this plane?
>>  
>> Does anyone know the correct engine thrusts and wing and stab incidences?
>>  
>> Thanks
>>  
>> Ron Hansen
>>  
>>  
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20201019/9694d0a5/attachment.html>