[NSRCA-discussion] F21 - 3 questions

[Derek Koopowitz]

Jim,

 

The answers to your questions are in the rules… as with all answers – the written description takes precedence over the aresti ALL the time.

 
Page 30 – 5B.8.5 – d) – “In all manoeuvres which have more than one continuous roll, the continuous rolls must have the same roll-rate. In all manoeuvres which have more than one part-roll, the part-rolls must have the same roll rate. Lines between consecutive part-rolls must be short and of equal length. Between consecutive continuous rolls or part-rolls in opposite direction there must be no line. Where there are continuous rolls and part-rolls within one manoeuvre, the roll-rate for the part- rolls does not necessarily have to be the same as the roll-rate for the continuous rolls.”.  So to answer your question – all part rolls need to have the same roll rate and they can be different to the roll rate of continuous rolls.
If the roll direction is not specified then the rolls must go in the same direction – see Page 30 – 5B.8.5 – last paragraph.  So if you roll left on the ¼ roll then the snap must be left and then immediately followed by a snap to the right and then a ¼ roll to finish.
The answer is Yes – as long as you push/pull/push/pull correctly through all the corners then you will be ok.  Start upright and end upright.
 

From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> on behalf of NSRCA List <nsrca-discussion at lists.nsrca.org>
Reply-To: james woodward <jimwoodward89 at gmail.com>, NSRCA List <nsrca-discussion at lists.nsrca.org>
Date: Monday, March 16, 2020 at 11:37 AM
To: NSRCA List <nsrca-discussion at lists.nsrca.org>
Subject: [NSRCA-discussion] F21 - 3 questions

 

Gents - in order to help pas the time due to CV - I have 3 legit questions on F21:

 

Question 1:  Center Humpty with 1/4 rolls integrated on the entry & Exit.  Does the "Roll-Rate" of the entry/exit Integrated 1/4 Roll(s) need to match the Roll-rate of the 1-Roll up, and Opposite 1/2 Rolls down?  Or, are the integrated 1/4 rolls treated separate from the rolls-on-lines, but need to match each other (entry/exit)?  

 

Question 2:  45 Downline.  Does this maneuver need to be flown as depicted in the Aresti, IE, does the First 1/4 Roll and First Snap, with 2nd Snap & 2nd 1/4 roll the same direction?  Or, are the 1/4 rolls separated from the snaps, and the only thing that matters is the Snaps are "opposite", and the Exit is Inverted? 

 

Question 3:  Horizontal Square:  Does the 1/4 Entry, subsequent 3 1/2 Rolls, and final 1/4 Roll, need to be flown as depicted in the Aresti?  The Aresti depicts these as "outside" rolls (IE, there is a Left horizontal square, and a Right horizontal square, depending on direction of flight.  Or, does only the "pull or push corners" matter, and the Exit to Upright?  

 

No gotcha's here - just wondering as I have seem various iterations.  I read the .ppt on NSRCA, and didn't see these elements specifically pointed to.

 

Thanks,

Jim W. 

_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20200317/57ee0a08/attachment.html>