[NSRCA-discussion] 3D Printer / CNC / Laser Cutter Combo

[Monte Richard]

I too have used the MakerGear M2 for many years. It’s an out of the box usable printer. No assembly required. A bit more costly than some of the alternatives.

Sent from my iPhone

On Dec 31, 2020, at 11:48 AM, David Cook via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:


I have very good luck with MakerGear
I have an M2 which has run constantly for 6 years. built solid!
www.makergear.com<https://www.makergear.com/?gclid=CjwKCAiAirb_BRBNEiwALHlnD0wQ-zcjMDy4KCKndHvKfCH_YgsK3vStMOMAh54MZz0fVdNgdAvcHhoCmdcQAvD_BwE>

DC



On Thu, Dec 31, 2020 at 11:00 AM bryan kennedy via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:
I have a Creality CR-6 SE printer.  it works great. I am working on a scale project and printing most all of the cockpit parts , designing them in Fusion 360 (Autodesk) and then printing them on this printer.  Works very well but this is not a CNC machine, just a 3D printer

Hope everyone is doing well, has been a while but I am still here :-) .  Happy New Year

Bryan

Team Kennedy




Creality3D CR-6 SE 3D Printer<https://creality3d.shop/collections/3d-printer/products/creality3dcr-6-se-3d-printer>

<https://creality3d.shop/collections/3d-printer/products/creality3dcr-6-se-3d-printer>





Creality3D CR-6 SE 3D Printer

Buy the official Creality3D CR-6 SE 3D Printer for a discounted price of $384.99 and enjoy a 1-year warranty and...







On Thursday, December 31, 2020, 09:24:41 AM EST, Vicente Bortone via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:


Hello all,

Just checking the experience using one of these.  Here an example:

https://www.amazon.com/gp/product/B07H92MPRS/ref=ox_sc_saved_title_1?smid=A3MPUOP8S5QTBF&psc=1

There are others.  Happy New Year 2021,

Vicente "Vince" Bortone
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
(c) 2020 Compass Engineering & Consultants, LLC. All rights reserved. This electronic transmission, and any attachments hereto, is intended only for the use of each individual recipient named above and may contain information belonging to the sender that is confidential, proprietary, is subject to copyright, constitutes a trade secret or is legally privileged. If you are not an intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please immediately (i) notify the sender, (ii) permanently delete the original and all copies of this electronic transmission and all attachments hereto, and (iii) destroy all printouts of this electronic transmission and all attachments hereto. Please note that electronic transmissions to and from the sender may be monitored by the sender's employer. Thank you for your cooperation.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20201231/a4af77a3/attachment.html>