[NSRCA-discussion] Sheeting built up wings...old school!

[wcgalligan]

I use c/a on bottom side then urethane on top side. Rubber bands work good Across each rib and or eight down. Did my Harmony bipe wings this way.Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone
-------- Original message --------From: Richard Lewis via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> Date: 12/13/20  9:20 PM  (GMT-06:00) To: General pattern discussion <nsrca-discussion at lists.nsrca.org> Subject: [NSRCA-discussion] Sheeting built up wings...old school! Alright, let’s see if this list is still alive!!I’m building a classic 40 sized MK kit.  The wings are fully sheeted.  There are no construction aids such as tabs, cradles, jigs, etc. for the wing construction.  I’ve got the wing skeleton framed up and ready to sheet.  The wing is tapered thickness and the top is flat span wise giving the wing a slight dihedral.So the question for the builders is...What’s the best method/trick to sheeting a built up , fully sheeted wing structure?Thanks in advance!Richard LewisSent from my mobile device._______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20201214/0388f7ca/attachment.html>