[NSRCA-discussion] trimming

[Dave Burton]

As we also know, there’s no such thing a too much power. And way, way, too much is about right!

 

From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> On Behalf Of Vicente Bortone via NSRCA-discussion
Sent: Tuesday, October 29, 2019 8:30 AM
To: Stuart Chale via NSRCA-discussion <nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] trimming

 

John,

You got very good information.  For sure we would like to know if you fix it and what you did.  Something that I would like to add.  Just use the correct amount of power required to do the up line.  As we know, too much power corrupts.  

Good luck,

.  

Vicente "Vince" Bortone

 

 

On Tue, Oct 29, 2019 at 6:37 AM Stuart Chale via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:

Which airplane?  Not all designs behave the same way.  I had one modern design plane that no matter what I tried always pulled to the canopy in the vertical.  

But as already mentioned start with incidences.  Positive in the wing will help. If the incidence is correct to start then move the CG back.  Finally add downthrust.  

 

My Hebert designed planes have always been very sensitive to CG in this respect.  My Mythos much less so.

 

Stuart 

Sent from my iPad





On Oct 28, 2019, at 5:53 PM, wayg2013 via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> > wrote:

 

Down thrust

 

 

 

Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone

 

-------- Original message --------

From: John Fuqua via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> 

Date: 10/28/19 4:43 PM (GMT-06:00) 

To: NSRCA <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org> > 

Subject: [NSRCA-discussion] trimming 

 

Real quite on the list.   Need some advice.    What is the trimming fix for a plane that is pulling to the canopy in a vertical upline ??

 

 

John

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org> 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 


 <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> 

Virus-free.  <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20191029/957b2c40/attachment.html>