[NSRCA-discussion] Elevator alignment jig photo

[KEVIN DUNCAN]

Here’s another email.  The first one had large file sizes.  I’ve reduced them.  Hopefully these go through this time.

Kevin

From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org> On Behalf Of Jim Houck via NSRCA-discussion
Sent: Saturday, May 11, 2019 8:17 PM
To: Jas S <justanotherflyr at gmail.com>; General pattern discussion <nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] Elevator alignment jig photo

For some reason, I don't get the images I just get <file.jpg>.

On Sat, May 11, 2019 at 9:04 PM Jas S via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:
Perfect Kevin, thank you 👍

Jas iP

> On May 11, 2019, at 9:36 PM, KEVIN DUNCAN <duncanbp at msn.com<mailto:duncanbp at msn.com>> wrote:
>
> Not sure if this is what you're looking for, but this is the jig I use to keep my elevator straight with the stab.  It came with my Episode kit.  I cut it and attached braces so I can lay it over the stab without removing the servo and linkages.
>
> Hope this helps,
> Kevin
>
> -----Original Message-----
> From: NSRCA-discussion <nsrca-discussion-bounces at lists.nsrca.org<mailto:nsrca-discussion-bounces at lists.nsrca.org>> On Behalf Of Jas S via NSRCA-discussion
> Sent: Saturday, May 11, 2019 6:14 PM
> To: nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>
> Subject: [NSRCA-discussion] Elevator alignment jig photo
>
> Does anyone have a picture of a ‘jig’, or sleeve, that goes over the stab/elevator for checking incidence they can send me please. Basically the airfoil cut out of a piece of lite-ply that slides over the stab to keep the elevator aligned with the stab.
>
> Thank you
>
> Jas iP
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> <Jig.pdf>
> <IMG_3423.JPG>
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--
Thanks

Jim R Houck
Cell: 512-947-5032
AMA 22622
FAA FA3TWMW49W
FCC KG5ZMZ

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20190512/488acba6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Jig.pdf
Type: application/pdf
Size: 133560 bytes
Desc: Jig.pdf
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20190512/488acba6/attachment.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Jig Picture.JPG
Type: image/jpeg
Size: 47914 bytes
Desc: Jig Picture.JPG
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20190512/488acba6/attachment.jpe>