[NSRCA-discussion] Castle settings

Thu Nov 2 06:42:19 AKDT 2017

Thanks

Jonathan Bruml
Techstyles
www.techstyles.com<http://www.techstyles.com>
_____________________________
From: Jay Gerber via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Thursday, November 2, 2017 10:19 AM
Subject: Re: [NSRCA-discussion] Castle settings
To: 'GHWatson_comcast' <ghwatson at comcast.net<mailto:ghwatson at comcast.net>>, 'General pattern discussion' <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>, 'Atwood, Mark' <atwoodm at paragon-inc.com<mailto:atwoodm at paragon-inc.com>>

Thanks for the great update Mark and for GH posting to the list for us “non” Facebook users….:(….(wish we could get the pics as well…)….:(….Jay

From: NSRCA-discussion [ NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of GHWatson_comcast via NSRCA-discussion
Sent: Wednesday, November 01, 2017 11:22 PM
To: 'Atwood, Mark'; 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Castle settings

Mark per your request…

Team USA had another productive day here in Argentina. We are starting to find our rhythm with regard to navigating through town and settling into our surroundings. Today was a full day out at the same practice field albeit at a different location on the airport property.

We started the day checking out the small diner that sits on the airport grounds. The proprietor there seemed more than happy to accommodate any request and we had a nice breakfast of hot ham/cheese/egg sandwiches and variants there of. He accommodated us throughout the day with lunch sandwiches, burgers, and beverages. Interesting side note, Hamburgers here actually have ham… on the burger unless you specifically order it otherwise. Go figure.

It was another day of cool temps and moderately heavy winds. The days seem to start out comfortably warm with the sun providing some warmth, but so far each day has taken a chilly turn around noon as the cloud layer rolls in, and the winds crank up a notch. The high today was only around 60deg F and with winds steady at 16-18knts it becomes quite cold after you’re in it all day.

Most of the remaining teams finally arrived today. Maybe the number one highlight of participating in these events is getting to meet, and make friends with people from all over the world. We continued to practice with the Brazilian and Argentinian teams, but also got to spend time with Robin Trumpp and the German team, the gang from New Zealand (Andrew, Hamish and Suetonia) and our friends from South Africa (Roston, Andre, Clinton and Susan) who had a long struggle with airplanes getting left behind in Johannesburg. Besides having the common bond of RC model airplanes, you can easily start a conversation with anyone in this group by simply mentioning “long flight” and “$%&# customs…” and from there the conversation flows.

I haven’t really commented much on the flying thus far. Our guys are all flying extremely well. Jason, Andrew and Joseph all being veterans of WC stress were quick to lock in and demonstrate exactly why they’re veterans, handling the wind well, and flying very clean and consistent. That said, if AC is the new comer to the group, you wouldn’t know it. He’s adapted quickly to the "all team, all the time" approach we take over here, and his flying has been outstanding.

Al and I used the mid part of the day to break away from the group and go check out the contest site. I had to officially register the team and deliver back the Team trophy and JR World Champion trophy (The US has 2 of 3.. not too shabby!!) to the organizers and we used that opportunity to walk the whole site and check out both contest flight lines which are positioned about 3/4 mile apart on a 100’ wide paved runway. The site is excellent, with a completely open view to the south and virtually no visual obstructions for miles. The terrain here is all marsh, VERY flat with either low grasses or water. It appears to be a very nice venue. But windy… verrrrrry windy. The ocean is less than 3 or 4 miles to the east.

The day ended heading back to our lodging and a few of us taking a walk through the tourist town of Villa Gesell that we are in. Many of the shops and restaurants are still closed for the season until the weather warms up a little more, but there are still plenty of places to get food. Our horrible lack of Spanish speaking ability either limits our options, or tests our willingness to gamble on a cryptic menu. We gambled last night (successfully) so tonight we took the safe route and went with food we can see and simply point to! (Pizza and a few rotisserie chickens)

Tomorrow will likely be a repeat of today. We do not currently know when our model processing is scheduled for, or when our official practice slot is. That should all be made available tomorrow.

Photos: Chuck and Kevin, AC and AL... all trying to stay warm, Leslie, Andrew, Kevin and Al at the little airport diner, and the team out on the beach taking pre-dinner stroll with our new mascot Stray Dog #14.

Side note... Dinner here starts at 10pm. As in the restaurants don't open up much before that and look at you funny when you try to come in at 7:30pm (stupid Americans). Sigh... we're learning to eat late.

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Atwood, Mark via NSRCA-discussion
Sent: Wednesday, November 1, 2017 9:06 PM
To: Jon Bruml <jon at techstyles.com<mailto:jon at techstyles.com>>
Cc: General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Subject: Re: [NSRCA-discussion] Castle settings

COLD!!!

I’m trying to post daily on the Team FB page.  Our internet is spotty at best and only when we are OUTSIDE in the courtyard of our lodging.  It’s a bit of a pain.  If someone could please take the FB post and possibly copy it to the list for non FB users that would be great.  Hard to post things everywhere.

The FB page is "USA F3A World Championship Team”

MARK ATWOOD
o.  (440) 229-2502
c.  (216) 316-2489
e.  atwoodm at paragon-inc.com<mailto:atwoodm at paragon-inc.com>

Paragon Consulting, Inc.
5900 Landerbrook Drive, Suite 205, Cleveland Ohio, 44124
www.paragon-inc.com<http://www.paragon-inc.com/>

Powering The Digital Experience

On Nov 1, 2017, at 9:42 PM, Jon Bruml <jon at techstyles.com<mailto:jon at techstyles.com>> wrote:

How’s Argentina so far ?

Jonathan Bruml
Techstyles
www.techstyles.com<http://www.techstyles.com/>
_____________________________
From: Scott via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Sent: Wednesday, November 1, 2017 9:29 PM
Subject: Re: [NSRCA-discussion] Castle settings
To: General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>, Atwood, Mark <atwoodm at paragon-inc.com<mailto:atwoodm at paragon-inc.com>>

Glad you showed up to speak for yourself!

Sent from XFINITY Connect Mobile App

------ Original Message ------

From: Atwood, Mark
To: S. McNickle, General pattern discussion
Cc: Olstinske Dale, DaveL322
Sent: November 1, 2017 at 7:47 PM
Subject: Re: [NSRCA-discussion] Castle settings
Hey Scott,

Close... my issue was with a Hacker Q-80.  Not the pletty.  I’ve run the pletty on the Castle without a problem.

Greetings from chilly Argentina!

On Nov 1, 2017, at 8:08 PM, S. McNickle via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:
Maybe I should let Mark Atwood speak for himself, but he's kinda busy right now...
Mark told me he tried everything he could think of and couldn't get a Pletty Advance to run full power on a Castle ESC. He recommended the Jetti or O.S.  I got the O.S. and it works fine.

Scott
On November 1, 2017 at 5:51 PM Olstinske Dale via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>> wrote:

V4.22, Low timing but is set on Outrunner Mode not 8khz…could that be it?  Not sure why but thought I had read that the Advance works best in this mode?
Will check if that fixes it as soon as I can.
Dale

On Nov 1, 2017, at 1:35 PM, DaveL322 <DaveL322 at comcast.net<mailto:DaveL322 at comcast.net>> wrote:

What are the other settings?

Specifically check -
Software is 4.22, or higher
Low timing
8khz pwm

And.... All solder joints and connectors are healthy.

Possibly try reloading software...not likely to help, but it might.

Regards,

Dave

Sent from my Sprint Samsung Galaxy Note5.

-------- Original message --------
From: Olstinske Dale via NSRCA-discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Date: 11/1/17 3:59 PM (GMT-05:00)
To: General pattern discussion <nsrca-discussion at lists.nsrca.org<mailto:nsrca-discussion at lists.nsrca.org>>
Subject: [NSRCA-discussion] Castle settings

I have an Edge 80 HV Esc, Plettenberg Advance motor. I usually need around 70-75 A to get good performance, but I can’t get more than 60A from this one. I’ve recalibrate the throttle (fixed end points) but no improvement. Wondering if there is some other setting causing this?

Thanks,

Dale

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20171102/3bf9e3ad/attachment.html>