[NSRCA-discussion] HXT 4mm connectors

[Ron Hansen]

That is how I do it too.

 

But I use an opposite connector to help me tap it through the front side.

 

Prevents buggering up the connector and helps get the connector properly
seated.

 

Ron Hansen

 

From: NSRCA-discussion [mailto:nsrca-discussion-bounces at lists.nsrca.org] On
Behalf Of Ronald Van Putte via NSRCA-discussion
Sent: Sunday, April 02, 2017 8:53 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] HXT 4mm connectors

 

The way you assemble the HXT connectors is to push the wire through the
plastic housing, solder the connector on the wire and tap the connector back
into the housing by putting the wires down through a vise and drive the
connector into place.

 

Ron

 

On Apr 2, 2017, at 7:44 PM, Whodaddy Whodaddy via NSRCA-discussion
<nsrca-discussion at lists.nsrca.org> wrote:

 

I used to use them and found them hard to get the bullet back in the plastic
after soldering .. not impossible jus more effort than i wanted to put up
with .. 

 

Gary

Sent from my iPhone


On Apr 2, 2017, at 7:09 PM, Atwood, Mark via NSRCA-discussion
<nsrca-discussion at lists.nsrca.org> wrote:

I'm looking to convert all of my equipment to the HXT 4mm Bullet connectors
(Red housings).  Can someone that is using them tell me what the standard
convention is for wiring these?  It would appear from photos (Hobby king)
that the battery side is putting the positive lead on the male bullet
(larger housing) and the neg lead on the female bullet (smaller housing).
Is that what most are doing?    Feels backwards to me, but I want to match
conventions so I can buy prewired stuff in the future. 

 

-Mark

MARK ATWOOD

o.  (440) 229-2502

c.  (216) 316-2489

e.   <mailto:atwoodm at paragon-inc.com> atwoodm at paragon-inc.com

 

Paragon Consulting, Inc.

5900 Landerbrook Drive, Suite 205, Cleveland Ohio, 44124

 <http://www.paragon-inc.com/> www.paragon-inc.com

 

Powering The Digital Experience

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 



__________ Information from ESET Smart Security, version of malware database
15191 (20170402) __________

The message was checked by ESET Smart Security.

http://www.eset.com


__________ Information from ESET Smart Security, version of malware database
15191 (20170402) __________

The message was checked by ESET Smart Security.

http://www.eset.com



__________ Information from ESET Smart Security, version of malware database
15191 (20170402) __________

The message was checked by ESET Smart Security.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20170403/af682ffb/attachment.html>