[NSRCA-discussion] HXT 4mm connectors

[Ronald Van Putte]

The way you assemble the HXT connectors is to push the wire through the plastic housing, solder the connector on the wire and tap the connector back into the housing by putting the wires down through a vise and drive the connector into place.

Ron

> On Apr 2, 2017, at 7:44 PM, Whodaddy Whodaddy via NSRCA-discussion <nsrca-discussion at lists.nsrca.org> wrote:
> 
> I used to use them and found them hard to get the bullet back in the plastic after soldering .. not impossible jus more effort than i wanted to put up with .. 
> 
> Gary
> 
> Sent from my iPhone
> 
> On Apr 2, 2017, at 7:09 PM, Atwood, Mark via NSRCA-discussion <nsrca-discussion at lists.nsrca.org <mailto:nsrca-discussion at lists.nsrca.org>> wrote:
> 
>> I’m looking to convert all of my equipment to the HXT 4mm Bullet connectors (Red housings).  Can someone that is using them tell me what the standard convention is for wiring these?  It would appear from photos (Hobby king) that the battery side is putting the positive lead on the male bullet (larger housing) and the neg lead on the female bullet (smaller housing).  Is that what most are doing?    Feels backwards to me, but I want to match conventions so I can buy prewired stuff in the future.
>> 
>> -Mark
>> MARK ATWOOD
>> o.  (440) 229-2502
>> c.  (216) 316-2489
>> e.  atwoodm at paragon-inc.com <mailto:atwoodm at paragon-inc.com>
>> 
>> Paragon Consulting, Inc.
>> 5900 Landerbrook Drive, Suite 205, Cleveland Ohio, 44124
>> www.paragon-inc.com <http://www.paragon-inc.com/>
>>  
>>  <http://www.paragon-inc.com/>
>> Powering The Digital Experience
>> 
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion <http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>_______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20170403/6aac2feb/attachment.html>